Memory Seats - Cadillac CT6 2020 Convenience/Personalization Manual

Hide thumbs Also See for CT6 2020:
Table of Contents

Advertisement

MEMORY SEATS

SET MEMORY POSITIONS
With the ignition On or in
Accessory mode:
1. Adjust the driver's seat,
power outside mirrors
and power steering
column to the desired
positions.
2. Press and release the
SET button on the
driver's door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
Use the button that matches the Driver Information Center
welcome message indicating driver 1 or 2.
To store driver's seat and power steering column positions for
more clearance when exiting the vehicle, repeat these steps using
the
Exit button instead of button 1 or 2.
RECALL POSITIONS
Press and hold button 1, 2 or
and power steering column reach the previously set position.
The memory/exit positions can be programmed to be recalled
automatically when the ignition is turned On/Off (for exit recall,
the driver's door must be opened).
To set the automatic recall options, go to Settings > Vehicle >
Seating Position > Set Entry Memory and Set Exit Memory.
See Seats and Restraints in your Owner's Manual.
Optional equipment
Exit until the seat, mirrors
POWER SEATS (PLATINUM MODEL) ♦
Seat adjustment controls, a 4-way control pad with a Feature Select
toggle control, and a massage button are located on the driver's
door, front passenger's door and the rear seat armrest. Adjustment
features are displayed on the front and rear infotainment screens.
FEATURE AND MASSAGE SELECTION
With the ignition On, toggle
the Feature Select control to
display seat adjustment fea-
tures and massage options.
Use the 4-way control pad to
make adjustments up, down,
forward, or rearward to the
selected feature or to select
the massage type and intensity.
Press the massage button to recall the last massage type and
intensity.
AUTO HEATED SEATS/STEERING WHEEL ♦
AND VENTILATED SEATS ♦
When the vehicle is on, the automatic heated seats and automatic
heated steering wheel or automatic ventilated seats will be activat-
ed at the level required by the vehicle's interior temperature. Turn
off the heated or ventilated seats using the seat controls. Turn off
the heated steering wheel using the steering wheel control.
To turn the auto heated seats/steering wheel or auto ventilated
seats feature on or off, go to Settings > Vehicle > Climate and Air
Quality > Auto Heated Seats and Auto Cooled Seats.
See Instruments and Controls in your Owner's Manual.
9
See Seats and Restraints in your Owner's Manual.

Advertisement

Table of Contents
loading

Table of Contents