Displaying The Disc Status For Dvd/Video Cd; About Divx; Other Useful Features; Adjusting The Audio (Adjust The Subwoofer/Bass/Treble/Balance/Fader/Loudness/Nav. Level/Highpass Filter/Defeat) - Alpine IVA-D105R Owner's Manual

Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, etc.) of the currently playing DVD or of the currently
playing Video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
• Touching an area other than the function guide in the display within
5 seconds, turns off the disc status display.
• To play back a DVD-Audio disc, set "VCAP" in "Setting the DVD-
Audio Playback Mode" (page 33).
®

About DivX

®
DivX is a codec (software) program to compress moving images while
maintaining image quality using a highly advanced compression ratio
and operating speed.
®
• Official DivX Certified product
®
• Plays all versions of DivX
standard playback of DivX
• DivX, DivX Certified, and associated logos are trademarks of
DivX, Inc. and are used under license
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the DivX
extension "avi" or "divx".
The optimum size for DivX
Screen Size:
32 to 720 pixel (horizontal) × 32 to 576 pixel
(vertical)
With an aspect ratio other than 16:9, black bars may be
displayed on the left and right sides, or at the top and bottom of
the screen.
Image bit rate:
"average 4 Mbps, Peak 8 Mbps"
Home Theater Profile supported
The following audio recording systems are supported.
MPEG1 Layer II 64 to 384 kbps
MPEG1 Layer III 32 to 320 kbps
MPEG2 Layer III 8 to 160 kbps
MPEG2.5 Layer III 8 to 160 kbps
Dolby Digital 64 to 448 kbps (Max. 5.1ch)
26
-EN
®
video (including DivX 5) with
®
media files
®
mode with
®
disc playback is as follows:
\
Other Useful
Features
Adjusting the Audio
1
Touch [SETUP].
The SETUP selection screen is displayed.
2
Touch [ ] of AUDIO or press and hold the Rotary
encoder for at least 2 seconds on the unit.
The display changes to the AUDIO setup screen.
Display Example for Audio setup Screen
Scrolls the page list up or down.
Scrolls the list item by item.
Touching and holding will scroll continuously.
For details on the settings for DVD 5.1CH, refer to "DVD
5.1CH Operation" (page 43).
When an external audio processor is connected,
"A.PROCESSOR" is displayed on the list. For
A.PROCESSOR operation, refer to "External Audio
Processor" (page 44).
• Touching [RETURN] will return to the previous display.
• When an external audio processor is connected, BASS, TREBLE,
LOUDNESS, HIGHPASS FILTER or DVD 5.1CH is not displayed.
Adjusting the Subwoofer Level:
Touch [ ] or [ ] of SUBW. LV to adjust the subwoofer
output.
Setting range: 0 to 15
• The level adjustment becomes available when Subwoofer is turned on
is set in "Subwoofer On and Off" (page 39).
Adjusting Bass/Treble:
You can change the bass or treble frequency emphasis
to create your own tonal preference.
Touch [ ] to display the Bass or Treble adjusting screen.
Setting the Bass Centre Frequency:
The displayed bass frequency is emphasized
Touch [ ] or [ ] of FREQ. to select the desired bass centre
frequency.
Setting range: 60Hz, 80Hz, 100Hz, 200Hz
Setting the Bass level:
You can emphasize or weaken the bass frequency.
Touch [ ] or [ ] of LEVEL to select the desired bass level.
Setting range: -7 to +7