Switching The Subtitles (Subtitle Language); Switching From The Disc Menu; Playing Bonus Group; Displaying The Disc Status For Dvd/Video Cd - Alpine IVA-W200 Owner's Manual

Video CDs or DVD-VR disc with multiplex audio
1
During playback, touch [P1/2]
The function guide changes.
2
* Touch [P1/3] while playing a DVD-VR disc.
2
3
Touch [AUDIO]* .
The left and right channels will be output as shown in the
figure below, each time the button is touched.
3
* Touch [AUDIO] for at least 2 seconds to switch while playing a
DVD-VR disc.
AUDIO LL AUDIO RR
Switching the Subtitles (Subtitle
Language)
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [P1/2]*.
The function guide changes.
* Touch [P1/3] while playing a DVD-Audio or DVD-VR disc.
2
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 31).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc's default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
off. However, the subtitle language may differ depending on the disc.
• Switches the subtitles ON/OFF while playing a DVD-VR disc.

Switching from the disc menu

For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
Touch [MENU] or [TOP MENU] to display the
menu.
2
Select an item to confirm it.
See "If a menu screen appears" on pages 18.
*2
.
AUDIO LR AUDIO LL

Playing Bonus Group

Some discs contain Bonus Group which requires inputting a 4 digit code
number to play back.
If the 4 digits code number stored in "Setting of the Bonus Code"
(page 31) is the same as the code number for the playing disc,
the Bonus Group will be played back. When the code number is
different, operate as follows.
A message is displayed when in VCAP mode. Input the code
number for playing the disc using the 10 key input screen. The
code number stored in "Setting of the Bonus Code" will be
changed to the new number input here.
• For setting "VCAP", refer to "Setting of the DVD-Audio Playback
Mode" (page 31).
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, group number, etc.) of the currently playing DVD or of
the currently playing video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 31).
23
-EN