External Audio Processor Operation; External Audio Processor (Optional); Adjustment Procedure For Dolby Surround - Alpine IVA-D105R Owner's Manual

External Audio Processor
Operation

External Audio Processor (Optional)

When an external audio processor is connected to this unit, you can
operate it from this unit. Some audio processors may not be operated. In
this case, operate them in the connected product. Explanations below is
the case when PXA-H700 or PXA-H701 is connected for example.
Refer also to the operating instructions of the connected audio
processor.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting "Setting the Speakers", "Setting Bass Sound Control",
and "Graphic Equalizer Adjustments" are not available if the MRA-
D550 is connected. Additionally, if the MRA-F350 is connected, the
following setting "Setting the MX mode" is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
Adjustment Procedure for Dolby
Surround
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
Adjustment procedure
1
Speaker Setup (page 48)
(Turning the speakers to be used on and off and
setting their response)
2
Adjusting the speaker levels (page 49)
(Adjusting the signal output level to the various
speakers)
3 Mixing bass sound to the rear channel
(page 49)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Adjusting the acoustic image (page 49)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
44
-EN
5
Achieving powerful high volume sound
(page 49)
(Achieving energetic sound with even greater power,
like the sound in a movie theater)
6
Adjusting the DVD Level (page 50)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
Storing Settings in the Memory (page 50)
7
(Storing all the settings and adjustments made on the
IVA-D105R (not only the above settings/adjusts) in the
memory)
In case of combining the Automatic adjustments, etc.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
: the following settings can be made for an external audio
processor.
Following Steps 1 to 5 describe the common procedures for
operating the Audio Processor setting function. For details of
the setting function items, refer to descriptions of respective
items.
1
Check the Defeat mode is off (page 27), and then
touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [ ] of AUDIO.
The AUDIO setup screen appears.
3
Touch [ ] of A.PROCESSOR.
The A.PROCESSOR list screen appears.
4
Touch [ ] [ ] or [
change its setting.
Setting items :
X-OVER / T.CORR / PHASE / G-EQ / P-EQ / MEDIA XPANDER /
BASS SOUND CONT. / DOLBY PLII /REAR FILL / SPEAKER
SELECT / MULTI CH SETUP / SPEAKER SETUP / DVD LEVEL /
PCM MODE / USER PRESET
5
Touch [RETURN] to return to the previous screen.
] of the desired item to