TYAN Thunder n6550EX Manual page 76

‧ Serial number
‧ Firmware version
‧ MAC address / IP address / Net mask / Gateway of LAN interface
‧ Host system power state
The following actions can be initiated via SNMP:
‧ Reset server
‧ Power on/off server
‧ Reset KVM-over-IP Sever Management
The following events are reported by the KVM-over-IP Sever Management via
SNMP:
‧ Login trial at KVM-over-IP Sever Management failed.
‧ Login trial at KVM-over-IP Sever Management succeeded.
‧ Denying access to a particular action.
‧ Host system was reset.
‧ Host system was powered on/off.
Enable SNMP Agent
If this option is checked, the KVM-over-IP Sever Management will reply to
SNMP requests.
Hint: If a community is left blank, you cannot perform the according request. E.g.
if you want to disable the possibility to reset KVM-over-IP Sever Management
via SNMP, do not set a write community.
Read Community
This is the SNMP community, which allows you to retrieve information via
SNMP.
Write Community
This community allows you to set options and to reset the KVM-over-IP Sever
Management or the host via SNMP, i.e. all that affects the host or the KVM-
over-IP Sever Management.
System Location
Enter a description of the physical location of the host. The description will be
used in reply to the SNMP request "sysLocation.0".
System Contact
Enter a contact person for the host system. The value will be used in reply to
the SNMP request "sysContact.0".
SNMP MIB
70
http://www.tyan.com