Table of Contents
Advertisement
Disable Setup Protocol
Enable this option to exclude the KVM-over-IP Sever Management from the
setup protocol.
LAN Interface Settings
This entry field displays the current settings for the Ethernet/LAN interface of
the OPMA module. You may choose between auto negotiation and a fixed
setting for the Ethernet transceiver settings "interface speed" and "duplex
mode" in case auto negotiation does not work correctly.
LAN interface speed
Depending on your network connection you may select an according speed
value for this interface. To adjust the interface automatically, choose "auto
detect" (default value). If this selection results in misbehavior of the interface,
choose one of other speed options to work with. The interface will transmit and
receive data with that fixed speed.
LAN interface duplex mode
If necessary you may also select a specific duplex mode. The default value is
set to "auto detect" which leads to an automatic setting of the duplex mode
depending on your network (recommended). As an alternative you may
explicitly set the interface to either "half duplex" or "full duplex" mode
59
http://www.tyan.com
Advertisement
Table of Contents
