TYAN Thunder n6550EX Manual page 103

Feature
Resume On PME#
Resume On PCIE Wake
Resume On RTC Alarm
4.7.6 Event Log Configuration Sub-Menu
You can use this screen to view the Event Log Control Menu. This
logs system events (such as Clear CMOS, ECC memory errors, etc)
and writes the log into NVRAM. Use the up and down arrow ( / )
keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option. The settings are described on the
following pages.
Main Advanced
Event Logging details
View Event Log
Mark All Events as Read
Clear Event Log
Feature
Event Logging details
View Event Log
Mark All Events as Read
Clear Event Log
Option
Enabled Disable/Enable PME to
Disabled generate a wake event.
Enabled Disable/Enable PME to
generate a wake event.
Disabled
Enabled Disable/Enable RTC event to
wake after a power failure.
Disabled
BIOS Setup Utility
PCI/PnP Boot
Option
Views all unread events on the
__
Event Log.
OK
Marks all unread events as read.
Cancel
OK
Erases all of events.
Cancel
97
http://www.tyan.com
Description
Security Chipset
View all unread events on
the Event Log.
← → Select Screen
↑↓ Select Item
+/- Change Option
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Description
Exit