Table of Contents
Advertisement
3.5.6.3 Security
HTTP Encryption
If "Force HTTPS" option is enabled, access to the web front-end is only possible
using a HTTPS connection. KVM-over-IP Sever Management will not listen on
the HTTP port for incoming connections. In case you want to create your own
SSL certificate that is used to identify the KVM-over-IP Sever Management refer
to the Section called Certificate.
KVM Encryption
This option controls the encryption of the RFB protocol. RFB is used by the
Remote Console to transmit both the screen data to the administrator machine
and keyboard and mouse data back to the host.
If set to "Off", no encryption will be used. If set to "Try", the applet will try to
make an encrypted connection. In case that the connection cannot be
established an unencrypted connection will be used instead. If set to "Force" the
applet tries to make an encrypted connection. An error will be reported in case
the connection establishment fails.
IP Access Control
This allows you to set an IP address policy in order to specify which networks
are allowed to access KVM-over-IP Sever Management. Make sure you press
"Apply" to save and enable your changes.
61
http://www.tyan.com
Advertisement
Table of Contents
