TYAN Thunder n6550EX Manual page 43

Table of Contents

Advertisement

Management. Hence KVM-over-IP Sever Management has to do a lot more
conversion work to track the mouse than using absolute mode.
Relative mode is used by most Linux Systems and older operating system like
Windows 95/98. Therefore you need to select "Other Operating Systems" if your
PC uses this mode.
3.4.3.1 Remote Mouse Settings
A common problem with KVM devices is the synchronization between the local
and remote mouse cursors. KVM-over-IP Sever Management addresses this
situation with an intelligent synchronization algorithm. There are three mouse
modes available on KVM-over-IP Sever Management:
Auto Mouse Speed
The automatic mouse speed mode tries to detect the speed and acceleration
settings of the host system automatically. See the section below for a more
detailed explanation.
Fixed Mouse Speed
This mode just translates the mouse movements from the Remote Console in a
way that one pixel move will lead to n pixel moves on the remote system. This
parameter n is adjustable with the scaling. It should be noted that this works
only when mouse acceleration is turned off on the remote system.
Single/Double Mouse Mode
37
http://www.tyan.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

S4989

Table of Contents