Advertisement
Step 5
BH18
Each screw in the wall requires a
washer.
CORRECT
INCORRECT
1
Slide side siding into channels
of corner posts, flat edge upward,
bottom edge down resting on oor
frame. Always follow this pattern.
Fasten bottom edge and tab of stud
to oor frame using a screw. Fasten
center to stud with screws. Do not
fasten at edge yet.
2
Install side siding as before.
Note how the slot in bottom edge
must overlap at edge of last siding.
Fasten both siding panels to stud at
this overlap.
3
Install side siding to the top as
before.
4
From inside building, fasten sid-
ing to corner posts using screws.
5
Repeat steps 1 through 4 for op-
posite side of building.
NOTE
Be careful to install the correct
panel in each position as shown.
The oor frame must be square
and level or holes will not align.
Parts Needed For
Side Siding
STEP
4
View
Bottom
Edge
Flat
Edge
Be certain all Siding
overlaps are fastened
with a single screw
18
9911 Side Siding (6)
End
9911
STEP
1
STEP
3
STEP
2
9911
Washer
THIS SCREW MUST
FASTEN TAB OF STUD
Advertisement
