Advertisement
Step 3
BH16
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
The top frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup-
port the roof.
1
Position corner posts at the
corners of the oor frame as shown.
Fasten the corner post to the oor
frame with 2 screws.
Support the corner posts with stakes
or other devices until door jambs are
attached.
2
Fasten the door track assembly
(holes on top) behind the top of the
front corner posts using 1 screw in
each corner. See the gure.
3
Fasten the rear wall angle be-
hind the top of the rear posts using
2 screws in each post.
4
Fasten the side wall angles be-
hind the top of the side posts using
2 screws in each corner. Side wall
angles overlap rear wall angel in
corners.
The oor frame must be square
and level or holes will not align.
Parts Needed For
Posts/Top Frames
5288
SIDE
5288
STEP
4
9912
9396
16
5288 Corner Post (4)
Door Track Assembly (1)
9907 Rear Wall Angle (1)
9912 Side Wall Angle (2)
REAR
TOP VIEW
FRONT
Wall Angles
Must Face
Inside
Building
5288
SIDE
STEP
5288
1
Short Leg
on Top
STEP
3
9907
9912
Long Leg
on Top
Opening
Facing In
Short Leg
on Bottom
STEP
2
Advertisement
