Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
USER MANUAL
©
AD-3600IP Viaccess
Digital Satellite Receiver
Printed on recycled paper

Summary of Contents

  • Page 1

    USER MANUAL © AD-3600IP Viaccess Digital Satellite Receiver Printed on recycled paper...

  • Page 2

    Issue: AD3600-B-1B © 2001 EchoStar International Corporation - The Netherlands We encourage you to express your thoughts on this user manual. Please send your comments to: EchoStar International Corporation Technical Publications Department Schuilenburglaan 5a 7604 BJ Almelo The Netherlands...

  • Page 3

    Software Version: ... INTENDED USE This user manual is intended for anyone who uses an EchoStar satellite receiver. It can be used by both first-time and experienced users of satellite receivers who want to install, use and maintain their receiver.

  • Page 4

    SER MANUAL EchoStar International Corporation has to the best of her abilities, everything done to supply you with the most up-to-date information. EchoStar International Corporation makes no warranties with respect to the information provided by this user manual and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

  • Page 5: Table Of Contents

    TO SET THE USER PREFERENCES Maintenance HARDWARE MAINTENANCE SOFTWARE MAINTENANCE END OF LIFE DISPOSAL Troubleshooting TO SOLVE A PROBLEM Glossary LIST OF USED ABBREVIATIONS EXPLANATION OF USED TERMINOLOGY EXPLANATION OF THE SEARCH MODES Digital Satellite Receiver Preface 4-14 4-16 4-18 5-10 5-14 Page...

  • Page 6

    USER DEFINED LNB(F) MATRIX Appendix 2 INTRODUCTION THE BATTERIES THE KEYS PROGRAM THE TV AND VCR KEY SPECIAL SETUP FUNCTIONS SPECIAL FUNCTIONS TO SOLVE A PROBLEM EQUIPMENT CODES Page A1-1 A1-1 A1-1 A2-1 A2-1 A2-1 A2-3 A2-5 A2-6 A2-7 A2-8 EchoStar AD-3600IP Viaccess...

  • Page 7: General Safety, Electrical Safety

    Only use an approved extension (convenience) lead suitable for the electrical power con- sumption of the installed equipment. Digital Satellite Receiver Safety Information Section 1 Page 1 - 1...

  • Page 8: Notational Conventions Used In This Manual, Symbols Used On The Receiver

    The double insulation symbol. This symbol tells you that the receiver is electrically safe within the normal use of the receiver as stated in the safety chapter. Page 1 - 2 IF NOT AVOIDED COULD RESULT IN EchoStar AD-3600IP Viaccess...

  • Page 9: Storage And Transport, To Unpack Your Receiver, The Contents Of The Box

    ENVIRONMENTAL REMARK Dispose the packaging in an environmental safe manner. Please inform yourself on local regulations with respect to the disposal of reusable materials. Digital Satellite Receiver Preparation Section 2 HE PLASTIC PACKAGING MAY Page 2 - 1...

  • Page 10: To Setup Your Peripheral Equipment, To Setup The Receiver

    Please refer to the user manuals of your terrestrial antenna, dish, TV, video recorder and/or audio equipment to make sure this equipment is properly installed and configured before you install the receiver. EchoStar recommends that you follow at least the following instructions: 5.1. THE TERRESTRIAL ANTENNA 1. Make sure: The terrestrial antenna is in good condition and well aligned for the best reception (avoid corroded contacts);...

  • Page 11: Connect Your Equipment

    1. On the rear panel of the receiver find the SERIAL PORT connector. 2. Install a serial cable between the SERIAL PORT connector (receiver) and the serial port connection of the PC. Digital Satellite Receiver AKE SURE THAT IT IS SAFE TO PROCEED WITH THE INSTALLATION COAXIAL CABLES...

  • Page 12: Connect A Dish

    Section 3 CONNECT A DISH It is possible to connect the different dish configurations with the use of RF coaxial cables. Only the most common configurations are discussed. If in doubt, please ask the EchoStar service department for advice. WARNING...

  • Page 13

    Failing to do so can cause damage to the equipment. 3. Install the polarotor power cable to the + 5V and GND connectors (receiver). 4. Install the polarotor skew cable to the SKEW connector (receiver). Digital Satellite Receiver SWITCH LNB(F) ERRITE FEED...

  • Page 14: To Setup Your Receiver For The First Time

    The receiver display shows: - first a moving dot; - then it shows - - - - The TV shows the first page. EchoStar AD-3600IP Viaccess...

  • Page 15

    RCU, press the OK key. 29. Go to the Search Channels field. 30. On the RCU, press the OK key to advance. Digital Satellite Receiver Installation SWITCH INSTALLATIONS Section 3...

  • Page 16

    30. Repeat the procedure for the middle and Western Satellite. 31. Set the West limit ( key), refer to step 26. 32. Go to the Autosat field. 33. On the RCU, press the OK key to advance. Page 3 - 6 UTOSAT EchoStar AD-3600IP Viaccess...

  • Page 17

    OK key. 28. Go to the Program Satellites field. 29. On the RCU, press the OK key to advance. Digital Satellite Receiver Installation ANUAL SELECTION Section 3 Page 3 - 7...

  • Page 18

    26. Wait for the search to complete: a. the receiver display shows a moving dot; b. the search completed popup menu appears. 27. On the RCU, press the OK key to end the initial setup procedure. Page 3 - 8 EchoStar AD-3600IP Viaccess...

  • Page 19: The Receiver

    FAMILIARIZATION THE RECEIVER The digital satellite receiver has 2 Common Interface slots and an embedded Viaccess smart card reader. The front panel gives you the control over the basic functions. The rear panel gives you various connections to connect the audio and video equipment as well as a terrestrial and dish antenna.

  • Page 20

    The GND connector (spring-clip), for the connection of the ground terminal of the feedback sensor and the polarotor; The SKEW connector (spring-clip), for the connection of the skew terminal of a polarotor; EchoStar AD-3600IP Viaccess...

  • Page 21

    1.3. THE REMOTE CONTROL UNIT (RCU) The EchoStar Tri Control is a programmable RCU that also can control your TV and VCR. The EchoStar Tri Control requires two AA/R6 alkaline batteries to operate. ON/STANDBY To switch to standby or on.

  • Page 22: The Echonav Installation Menu

    EXIT key. Page 4 - 4 keys to scroll the selectable items. keys to navigate between the left and right column of selectable keys let you make a selection in the EchoStar AD-3600IP Viaccess...

  • Page 23

    Parental Lock page; button, that gives you access to the Local Time page; button, that gives you access to the TV System page. Digital Satellite Receiver Familiarization The main menus are divided in sub menus, selection pages and option fields.

  • Page 24

    To lock the installation menu for unauthorized users. Channel lock To lock or unlock all locked selections at once. Master hide To hide or unhide all hidden selections at once. Change PIN Code To access the change PIN code page. EchoStar AD-3600IP Viaccess...

  • Page 25

    EPG and the timers, it is necessary to set the local time correctly. You can customize: 2.1.5. TV SYSTEM PAGE This menu page allows you to customize the TV settings used for the receiver, you can customize: Digital Satellite Receiver Familiarization Old password To type in the factory default or personal PIN code.

  • Page 26

    Program Satellites page (for motorized dish); button, that gives you access to the User LNB Setting page; button, that gives you access to the About EchoStar information page; button, that gives you access to the System Upgrade page;...

  • Page 27

    This sub menu allows you to customize the system setup to match your installation. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize: Digital Satellite Receiver Familiarization System To set the dish type you use.

  • Page 28

    The satellite offset will affect all satellite positions, this means that all scanned positions will change which might result in total loss of signal for all satellites. Search Channels To confirm the selections you made and advance to the Search Channels page. EchoStar AD-3600IP Viaccess...

  • Page 29

    You can customize: 2.2.5. ABOUT ECHOSTAR The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the status information about the receiver. You can view: Digital Satellite Receiver Familiarization User’s LNB...

  • Page 30

    Section 4 2.2.6. SYSTEM UPGRADE PAGE This menu page allows you to upgrade the receiver’s software. EchoStar provides software updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite. If you are not able to receive the satellite/transponder, you always can upgrade the software through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software from the EchoStar website.

  • Page 31

    CI-module and related smart card. Note that this page can show differently for other CI-modules and related smart cards. EchoStar has no control over the information provided by the related service provider, therefor no specific information is given. Section 4...

  • Page 32: The Echonav Mode And Selection Menus

    To access the list of all scanned TV channels available on the current selected satellite. Favorites To access to your own favorite lists. You can rename the favorites to something meaningful to yourself, e.g. Film, Sport, Kids. EchoStar AD-3600IP Viaccess...

  • Page 33

    The Group options are available in the all modes. The Group option allows you to group the lists in different ways. The availability of the Group options is mode dependent, the available options are: Digital Satellite Receiver Familiarization None No edit option is selected.

  • Page 34: The Electronic Program Guide (epg)

    EPG. Digital channels that transmit EPG offer you program information in advance for a certain period of time. Dependent of the service provider, EPG is offered in different ways. After you have entered the EPG, you can select the different EPG options, these are: EchoStar AD-3600IP Viaccess...

  • Page 35

    4.1. THE TIMERS Digital Satellite Receiver Familiarization The event timers are a kind of alarm clock. An event timer reminds you when a program or a timed VCR recording starts. You can set the next timers: VCR timer, to automatically switch over to the timed program before it really starts.

  • Page 36: The Infobanner And Pop-up Menus

    If the volume +/- key is pressed, the volume button is shown (see the radio InfoBanner). 5.1.1. THE RADIO INFOBANNER The radio InfoBanner shows the information related to the actual channel. The radio InfoBanner can show the same information as discussed with the TV InfoBanner. Page 4 - 18 EchoStar AD-3600IP Viaccess...

  • Page 37

    If transmitted, you can set per channel your alternate audio and subtitling as shown above. Digital Satellite Receiver Familiarization Section 4...

  • Page 38

    Familiarization Section 4 Page 4 - 20 EchoStar AD-3600IP Viaccess...

  • Page 39: To Navigate Through The Menus

    Normally, you only can view a scrambled channel with the applicable CI-module and/or smart card inserted in a CI-slot or Viaccess smart card reader. Digital Satellite Receiver keys to scroll the selectable items. keys to navigate between the left and right column of selectable...

  • Page 40

    OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Page 5 - 2 EchoStar AD-3600IP Viaccess...

  • Page 41

    7. On the RCU, press the OK key to confirm. 8. Either: a. press the WHITE key to end the session, or b. select the next channel you want to move. Digital Satellite Receiver Operation Section 5 Page 5 - 3...

  • Page 42

    8. You can restore all the locks on the channels: a. On the RCU, press the MENU key; b. Select the Parental Lock menu; c. Enter the correct PIN-code as requested; d. Set the channel lock to On. Page 5 - 4 EchoStar AD-3600IP Viaccess...

  • Page 43

    1. In the Edit menu, select the RENAME option. 2. Read the available help text for information. 3. Go to the channel you want to rename. 4. On the RCU, press the OK key. Digital Satellite Receiver keys to set the Operation Section 5...

  • Page 44

    1. Make the hide function available for edit: a. On the RCU, press the MENU key; b. Select the Parental Lock menu c. Enter the correct PIN-code as requested; 2. Set the Master Hide to Off. Page 5 - 6 EchoStar AD-3600IP Viaccess...

  • Page 45: Use The Favorite Lists

    The main difference is that you can setup and organize the favorite lists as required. EchoStar has already pre-named the favorite lists to help you getting started. It is however possible to change the name of the favorite list to something that is meaningful to you.

  • Page 46

    10. On the RCU, press the OK key. Note a red bullet appears behind the selection and the cursor advances to the next item. 11. If you want to undo the selection, select again and press the OK key. Page 5 - 8 EchoStar AD-3600IP Viaccess...

  • Page 47

    OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Digital Satellite Receiver Operation Section 5 Page 5 - 9...

  • Page 48: To Use The Electronic Program Guide (epg)

    The EPG information is not always available. Sometimes the service provider (who sends the EPG information) supplies only the program name, the now/next infor- mation or sometimes nothing at all. EchoStar has no influence on this matter. Make sure the local time is set otherwise you can not view EPG information because it needs the correct time (Refer to the Local Time menu).

  • Page 49

    VCR also to the same time as on the receiver. Please refer to the user’s guide of your VCR how to record from a satellite receiver. On quite a lot of VCRs you have to select the so called external channel (E1) NOTE You cannot set a timer in the past or on a program that has already begun.

  • Page 50

    4. Delete the timer: a. use the key, to go to the Store Settings; b. read the available help text for information; c. press the OK key to confirm the deletion. Page 5 - 12 EchoStar AD-3600IP Viaccess...

  • Page 51

    2. On the RCU, press the 3. In the subtitle pop-up menu, select the required subtitle language. Note that subtitle information is provided by the service provider. 4. On the RCU, press the Digital Satellite Receiver key. key twice. key twice. key. Operation...

  • Page 52: To Set The User Preferences

    3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Page 5 - 14 menu; menu. menu; menu. EchoStar AD-3600IP Viaccess...

  • Page 53

    Now you will return to the parental lock menu. 7. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Digital Satellite Receiver Operation menu; menu. Section 5...

  • Page 54

    3. Read the available help text for information. 4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Page 5 - 16 menu; menu. menu; menu. EchoStar AD-3600IP Viaccess...

  • Page 55: Hardware Maintenance, Software Maintenance

    2. Press the OK key and make the selections. 3. Read the available help text for information. 4. Go to the Check Signal field. 5. On the RCU, press the OK key. Digital Satellite Receiver Maintenance IF USED CLEANING AGENTS CANNOT GET IN THE RECEIVER menu;...

  • Page 56

    OK key, to select the 2. In the About EchoStar information menu you can look up the factory and receiver information. 3. Read the available help text for information. Page 6 - 2 menu;...

  • Page 57

    NOTE EchoStar offers on a regular basis software updates via the satellite and the EchoStar website. If you have trouble to get a download with the latest software version, please ask your retail seller or dealer for assistance. 2.5. TO DO A FACTORY RESET...

  • Page 58

    RCU, press the OK key to confirm. 5. On the RCU, use the numeric keys to enter the Position. 6. Select the Location. 7. On the RCU, press the white key. Page 6 - 4 menu; menu. EchoStar AD-3600IP Viaccess...

  • Page 59

    Select List = All Channels d. Select Group = None e. Select Sort = None f. Select Edit = Add TP 3. On the RCU, press the OK key. Digital Satellite Receiver Maintenance Section 6 Page 6 - 5...

  • Page 60

    Select Group = None e. Select Sort = None f. Select Edit = Add PID 3. On the RCU, press the OK key. 4. Select the applicable transponder. 5. On the RCU, press the OK key. Page 6 - 6 EchoStar AD-3600IP Viaccess...

  • Page 61: End Of Life Disposal

    Specialized companies can recycle your equipment to increase the amount of reusable materials and to minimize the amount of materials to be disposed of. Please inform yourself on local regulations on disposal of your equipment. Digital Satellite Receiver Maintenance Section 6...

  • Page 62

    © 2001 EchoStar International Corporation All rights reserved...

  • Page 63: To Solve A Problem

    2. The EPG shows (little) grey balloons without text. 1.3. TV AND RADIO RELATED Problem 1. No picture or sound in the TV or radio mode. Digital Satellite Receiver Troubleshooting Possible cause What to do? Main power cable is damaged or not connected.

  • Page 64

    The group or sort option is set. You are in the wrong list. The channel is hidden. EchoStar AD-3600IP Viaccess Make sure the dish and LNB are clean and correctly adjusted. Do any necessary work. Check the UHF settings.

  • Page 65: Appendix

    West while I select Set East Limit. 5. In a motorized installation, I cannot select a specific satellite. Digital Satellite Receiver Troubleshooting Possible cause What to do? Batteries are empty. The RCU is set to another mode (TV, VCR).

  • Page 66

    You have selected the incorrect search method. You have selected an analog transponder EchoStar AD-3600IP Viaccess Inspect the cable for possible damage and install new cable as required. Use sufficiently shielded and correctly finished cables.

  • Page 67: List Of Used Abbreviations

    (the satellite receiver) rans onder ision econd ltra requency ideo assette ecorder sion olts peak-peak olts rootmeansquare imit idth x eight x...

  • Page 68: Explanation Of Used Terminology

    A signal frequency range (11.70-12.40ghz) intended for direct TV broadcast by satellite channels. A unit that is connected to a satellite receiver in order to unscramble a picture that is protected by encryption. Standard which describes the method of transmitting digital audio.

  • Page 69

    Pay TV PIN code Polarization Polarizer Polarmount Digital Satellite Receiver A frequency range (10.70-18.00 GHz) used by most European TV satellites. A device behind the feedhorn which processes the signal into a format which is understood by the receiver for further processing A LNB with an integrated Feedhorn.

  • Page 70

    Equipment inside a satellite responsible for receiving a single uplinked channel and rebroadcasting it back to Earth. In the satellite industry, vertical is used to indicate the direction in which the received signal is polarized. Normally you will find that it is abbreviated as V. EchoStar AD-3600IP Viaccess...

  • Page 71: Explanation Of The Search Modes

    In this mode the built-in database is used to search for the available digital channels. Then all new channels are added to the all channel list. None Transponders on the selected satellite are not searched for. Digital Satellite Receiver Glossary Section 8 Page 8 - 5...

  • Page 72

    © 2001 EchoStar International Corporation All rights reserved...

  • Page 73

    INDEX about echostar page ... 6-2 add a channel to a favorite list ... 5-8 add pid ... 4-15 add pid ... 6-6 add sat ... 4-15 add satellite ... 6-4 add tp ... 4-15 add transponder ... 6-5 alternate audio ... 4-18 alternate subtitling ...

  • Page 74

    ... 4-6 vcr timer ... 4-17 volume ... 4-15 volume button ... 4-18 warning ... 1-2 5-11 white key ... 5-3 yellow key ... 5-2 zoom ... 4-16 4-10 5-13 5-11 5-12 5-11 5-11 EchoStar AD-3600IP Viaccess...

  • Page 75

    In the User LNB setting menu, you can define your own LNB(F). You can use the list below to note the settings. User LNB(F) LO Frequency User ... 1 ..,..User ... 2 ..,..Digital Satellite Receiver LNB(F) Configuration matrix LO Selection 13/18V 9,750 13/18V 9,750 5,150...

  • Page 76

    LNB(F) Configuration matrix Appendix 1 Page A1 - 2 EchoStar AD-3600IP Viaccess...

  • Page 77

    For future use it is recommended that you make a note of the equipment codes and the serial number in the fields below: The RCU is already pre-programmed for the EchoStar receiver with code 0222. TV key: _ _ _ _...

  • Page 78

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 FAV key If your original remote control unit uses one/two number keys (usually marked as -/--, 10 or 20), press this key as usual. Volume +/- keys This key is used to control the volume level for the selected equipment.

  • Page 79

    The VCR key is used to setup the RCU to control your basic VCR functions. You can program the SAT mode keys to control a number of satellite receivers. The RCU is default programmed to control the EchoStar satellite receiver that came in the same box. NOTE Some codes are quite similar.

  • Page 80

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 4.1. SETUP WITH USE OF THE EQUIPMENT CODE LIST NOTE The procedures to set the RCU for the TV and VCR equipment is identical, therefor only the procedure to setup the TV is given.

  • Page 81

    EchoStar Tri Control, Programmable Remote Control Unit 4.3. READ OUT THE EQUIPMENT CODE NOTE You can read out the code from the RCU, just blink back the code. It is handy for future reference. Remember you only can blink back the code after the RCU operates your device.

  • Page 82

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 SPECIAL FUNCTIONS 6.1. VOLUME LOCK (PUNCH THROUGH) The RCU allows you to select the device that you want to control the volume of, independently from any other mode. As an example, if you are in the SAT mode, you can stay in the SAT mode and adjust the volume of the TV directly with the volume +/- key.

  • Page 83

    EchoStar Tri Control, Programmable Remote Control Unit TO SOLVE A PROBLEM Problem 1. Device does not respond to the RCU. 2. One of the mode keys blinks twice when a key is pressed but the device does not respond. 3. Device does sometimes not respond to the RCU.

  • Page 84

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 EQUIPMENT CODES 8.1. ECHOSTAR SATELLITE RECEIVERS AD2000 IP 0453 AD3000 series 0222 D2500 IP 0511 DSB1100 1086 DSB2000 0853 DSB9800 0871 DVR-7000 series 0222 IR700 0312 LT7500 0465 LT80+ 0688 LT8700...

  • Page 85

    EchoStar Tri Control, Programmable Remote Control Unit 8.2. ECHOSTAR KEY ASSIGNMENTS D2500 I.P. AD2000 I.P. DSB1000-2Ci Channel Up Channel Up Channel Channel Down Down Volume Up Volume Up Volume Volume Down Down ° TV/DBS Guide Guide Menu- Menu- Navigator Navigator...

  • Page 86

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 LT80+ SR200 I.P. SR-35, SR- 55, SR-100 Power/Stby Power/Stby ° ° ° TV/SAT RADIO/SAT- FAV/MAIN Mute- Channel Up Channel Up Channel Channel Down Volume Up Volume Up Volume Down ° TV- Select TV or Sat °...

  • Page 87

    EchoStar Tri Control, Programmable Remote Control Unit LT80+ SR200 I.P. SR-35, SR- 55, SR-100 Tuning Left Left cursor Tuning Right Right cursor Store Store ° Cancel WEST WEST STOP EAST EAST P.LOCK- set TIMER- set change p. Lock AUDIO- LOCK...

  • Page 88

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.3. TELEVISIONS (CONTINUED) Akito 0272 Akura 0218 0359 0282 0009 0412 0264 0037 Alba 0218 0235 0009 0418 0370 0355 0371 0037 0216 0247 0431 0163 0487 0036 0668 Alcyon 0076...

  • Page 89

    EchoStar Tri Control, Programmable Remote Control Unit 8.3. TELEVISIONS (CONTINUED) Baur 0303 0535 0195 0512 0037 0554 0191 0361 0544 0349 0505 0010 Bazin 0217 Beko 0370 0486 0037 Beon 0037 0418 Best 0337 0370 0421 Bestar 0037 0370 0374...

  • Page 90

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.3. TELEVISIONS (CONTINUED) Clarivox 0418 Clatronic 0218 0264 0370 0371 0217 0076 0247 0037 0009 0102 0320 Concorde 0009 Condor 0216 0247 0282 0320 0037 0370 0009 0102 0314 0411 Contec...

  • Page 91

    EchoStar Tri Control, Programmable Remote Control Unit 8.3. TELEVISIONS (CONTINUED) EchoStar 0222 Elbe 0435 0238 0259 0362 0292 0370 0163 0037 0218 0191 0411 0610 Elcit 0087 0247 0516 0102 0163 Elekta 0264 0282 Elin 0216 0037 0105 0104 0548 0361 0448 0349...

  • Page 92

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.3. TELEVISIONS (CONTINUED) Formenti 0087 0213 0216 0320 0163 0076 Fortress 0093 0087 Fraba 0370 0037 Friac 0009 0037 0102 Frontech 0247 0264 0349 0431 0448 0217 0009 Fujitsu 0206 0072 0102 0314...

  • Page 93

    EchoStar Tri Control, Programmable Remote Control Unit 8.3. TELEVISIONS (CONTINUED) 0264 0009 0282 0412 0217 0218 0418 0037 Hema 0217 0009 Hemmermann 0349 0544 Hifivox 0109 0196 0399 Hikona 0218 HiLine 0264 0037 Hinari 0208 0179 0036 0037 0218 0009 0163 0355...

  • Page 94

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.3. TELEVISIONS (CONTINUED) Isukai 0218 0037 0282 0217 0037 0371 0218 0282 0264 0216 0163 0480 0349 0361 0473 0548 0193 0346 0339 0208 0179 0264 0037 0247 0035 0653 0053 0094 0190...

  • Page 95

    EchoStar Tri Control, Programmable Remote Control Unit 8.3. TELEVISIONS (CONTINUED) Lumatron 0206 0037 0362 0163 0259 0361 0217 0264 0073 Lux May 0037 Luxor 0194 0237 0480 0492 0349 0361 0208 0356 0548 0163 8.4. VIDEO RECORDERS Adelsound 0004 Adyson...

  • Page 96

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.4. VIDEO RECORDERS (CONTINUED) Carena 0209 0081 Carrefour 0045 Casio 0000 Cathay 0278 Catron 0020 0041 0000 Cimline 0072 0209 Clatronic 0020 0072 Combitech 0352 Condor 0020 0278 Crown 0278 0072 0020 0322...

  • Page 97

    EchoStar Tri Control, Programmable Remote Control Unit 8.4. VIDEO RECORDERS (CONTINUED) General Technic 0348 Genexxa 0104 Goldhand 0072 Goldstar 0037 0000 Goodmans 0000 0072 0240 0278 0037 0020 0081 0348 0209 0403 Graetz 0041 0104 0240 0344 Granada 0104 0046 0048 0081...

  • Page 98

    EchoStar Tri Control, Programmable Remote Control Unit Appendix 2 8.4. VIDEO RECORDERS (CONTINUED) Loewe Opta 0081 0006 0037 0105 0004 0454 0162 Logik 0004 0240 0072 0106 0209 Lumatron 0278 Luxor 0106 0046 0043 0072 0104 0047 0048 M Electronic...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: