Table of Contents
Advertisement
Installing the Shoe Clips (Cleats) on Cycling Shoes
Note: The provided shoe Cleats fit both the right and left Pedals.
Tools needed (not included): pliers, 4 mm hex wrench
1.
With a pair of pliers, pull off the rubber cover to expose
the cleat mounting holes on the bottom of the cycling
shoe.
Note: This step may not be necessary, depending on the
type of shoe.
2.
From the bottom of the shoe, put the anti-skid sheet in
position over the cleat holes and then a cleat. Be sure
the single arrow on the cleat points toward the toe of the
shoe. Tighten the cleat mounting bolts (2.5 N·m).
3.
The cleat has an adjustment range of 20mm front to
back and 5mm left to right. Practice engaging with the
Pedal and releasing, one shoe at a time. Readjust to
determine the best cleat position.
4.
Using a 4mm hex key, fully tighten the cleat mounting
bolts (5 – 6 N·m).
(Cycling Shoes not provided)
4 mm
13
Hide quick links:
Advertisement
Table of Contents
