Switches And Jumpers - Johnson Controls Tyco 8200-1466-01 Quick Start Manual

IP-ACM v2 Ethernet Door Module features
Figure 4 on Page 9 shows the switches, jumpers, ports, and connectors of the IP-ACM Ethernet Door Module v2.

Switches and jumpers

See Figure 4 on Page 9
SW1
Table 7 on Page 9 describes the positions of switch SW1.
Figure 4: IP-ACM Ethernet Door Module v2
for the locations of the switches and jumpers on the IP-ACM v2.
Table 7: Switch SW1 descriptions
Position
SW1-1
SW1-2, SW1-3, and SW1-4
Description
OFF: Normal Operation
ON: Standalone Operation
Refer to the Initial Configuration section for details.
Not used. Must be in the OFF position.
9