Signal
Power Requirements
Power over
IEEE 802.3af (PoE) and 802at
Ethernet (PoE)
(PoE Plus), 25.5W max. LLDP
supported for PoE Plus
Local Power
12 or 24Vdc
2
max.
Installation and Enclosures
The following sections describe features and installation procedures of the plastic and metal enclosures with the IP-
ACM Ethernet Door Module v2.
Plastic enclosure
Figure 2
on
Page 6
and
acceptable for use in a plenum.
1
Compliance with IEEE 802.3 (AT or AF) specifications was not verified as part of UL294/B.
2
Maximum combined output limit for readers and locks is 17W (+/- 10%).
6
To
Switch Contact
1
P1
25.5W
Table 5
on
Page 6
describe the dimensions of the plastic enclosure. The plastic enclosure is not
Figure 2: Plastic enclosure mounting hole dimensions
Table 5: Plastic enclosure dimensions
Plastic Enclosure Dimensions
Item
Weight
AWG
Shield
24
Yes
18
No
Dimension
1.6lb (.72kg)
Maximum Length
328 ft. (100m)
Maximum length depends on
application and AWG