Table of Contents
Advertisement
PQQX14670ZA.book 51 ページ ２００５年２月２２日 火曜日 午後１２時０分
Wall Mounting
This unit can be mounted on a wall.
Push the hook and turn it
1
upward. Turn the hook until a
click is heard.
Press the tabs in the direction
2
of the arrows (1), then remove
the wall mounting adaptor (2).
1
1
Connect the AC adaptor. Tuck
3
the telephone line cord inside
the wall mounting adaptor, then
push the adaptor in the direction
of the arrows (1 and 2).
• The word "UP WALL" should face
upward.
• Fasten the AC adaptor cord to
prevent it from being disconnected.
Hook
2
1
To Power Outlet
Wall Template
Install screws using the wall
4
template below. Connect the
telephone line cord. Mount the
unit, then slide it down.
• Raise the antenna.
2
To charge the handset battery:
5
Rest the handset on the
charge contacts (1), then
push the top of the handset so
the hook snaps into the slot at
the top of the handset (2).
• The unit beeps once and the
CHARGE indicator lights.
OR
8.3 cm
Screws
(not included)
8.3 cm
To Single-Line
Telephone Jack
Hook
Slot
2
1
51
Advertisement
Table of Contents
