Panasonic KX-TG2340JX Operating Instructions Manual page 21

Pulse-or-tone dialing capability
Table of Contents

Advertisement

PQQX14670ZA.book 21 ページ 2005年2月22日 火曜日 午後12時0分
To dial after confirming the entered number
Enter a phone number.
1
• If you misdial, press Clear. Enter the correct
number.
• If a pause is required when dialing, press Pause
where needed (p. 44).
• To cancel, press [OFF].
Press [C] or [s].
2
To hang up, press [OFF] or place the handset
3
on the base unit
To adjust the receiver/speaker volume during a
conversation
There are 3 volume levels for the receiver and 6 volume levels for the speaker.
To increase volume, press [B].
To decrease volume, press [d].
• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at
the maximum/minimum level, the handset will
beep 3 times.
To redial the last number dialed
Press [C] or [s], then press [REDIAL].
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
1
Press [REDIAL].
• The last number dialed is displayed.
Scroll to the desired number by pressing [d] or
2
[B].
• You can also scroll down through the list by
pressing [REDIAL].
• To exit the list, press [OFF].
Press [C] or [s].
3
• To erase an item, scroll to the item then press Erase.
• If "No items stored" is displayed, the list is empty.
Making Calls
3334444|
Clear
Pause
K
L
Ex. Receiver volume: High
Speaker volume: Level 6
Volume
Low
High
(VE)
Mute
K
L
3334444
Erase
K
dB
21

Advertisement

Table of Contents
loading

Table of Contents