Literature - Husqvarna DM 330 Workshop Manual

2
"Basic structure"
"Gear housing – intermediate shaft" (Example)
4

LITERATURE

Workshop manual
DM 330, DM 340
HUSQVARNA CONSTRUCTION PRODUCTS
Workshop manual
The workshop manual covers virtually all work
in the workshop that involves the DM330 and
DM340 models. Some very simple and rather
obvious repair work has been omitted.
Disposition
The initial section entitled "Basic structure"
shows the fundamental design of the machine.
This arrangement means that mechanics who
have no experience of the machine must start
with this chapter.
Later on, the manual describes in detail in the
various chapters how the work is to be executed
for the basic modules.
Arrangement – illustrations and text
In addition to graphics and illustrations, there
are generally two text columns. The left-hand
text column gives a brief explanation and is
intended for experienced mechanics, whereas the
right-hand column is a more detailed descrip-
tion and is intended for mechanics with less
experience of repair work for this type of
machine.
Contents
The manual is divided into numbered chapters
as well as chapter headings that are specified in
bold at the top of each page.
The list of contents also has page references to
the start of each chapter.
Spares
Spares DM330, DM340
The folders include all spares for Husqvarna
DM330 and DM 340
The folder contains complete exploded
drawings for the whole machine where the
location, spares number and appearance of each
component is easy to identify.
525 59 31-26