Table of Contents
Advertisement
Chapter 3
Drive A, Drive B
This allows you to set the type of floppy dirves installed. Setting options:
[None] , [360K, 5.25in] , [1.2M, 5.25in] , [720k, 3.5in] , [1.44M, 3.5in] , [2.88M, 3.
5in]. Drive A default value: [1.44M, 3.5in]. Drive B default value: [None].
Video
This allows you to set the type of video card. Setting options: [EGA/VGA]
[CGA40] [CGA80] [MONO]. Default value: [EGA/VGA].
Halt on
This allows you to set the type of errors that will cause system halt on. Setting
option: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette] [All, But
Disk/Key]. Default value: [All, But Keyboard].
All Errors: The system will halt on and display the error message if any
error happens.
No Errors: The system will not halt on no matter any error happens.
All, But Keyboard: The system will halt on if any error happens. But the
system will not halt on if the keyboard function is not normal.
All, But Disk/Key: The system will halt on if any error happens. But
the system will not halt on if the disk drive and keyboard function is not
normal.
3-8
Advertisement
Chapters
Table of Contents
