Table of Contents
Advertisement
Chapter 1
TM
D-LED
The D-LED
help you understand your system. There are 4 LEDs
embedded in the mainboard which provides up to
16 combination of signals to debug system. The 4
LEDs can debug all problems that fail the system,
such as VGA, RAM or other failures. This special feature is very useful for the
overclocking users. The users can use this feature to detect if there are any
problems or failures while doing the overclocking.
Red
D-LED
TM
uses graphic signal display to
Green
System Power ON
- The D-LED will hang here if the processor is damaged or not insta
properly.
Early Chipset Initialization
Memory Detection Test
- Testing onboard memory size. The D-LED will hang if the memo
module is damaged or not installed properly.
Decompressing BIOS image to RAM for fast booting.
Initializing Keyboard Controller.
Testing VGA BIOS
- This will start writing VGA sign-on message to the screen.
Description
1-10
Advertisement
Chapters
Table of Contents
