SECTION 3: FUNCTIONAL BLOCK AND CIRCUIT ANALYSIS
INTRODUCTION
FUNCTIONAL BLOCK ANALYSIS
Oximetry Module
Introduction
Functional Block Analysis
Circuit Analysis
This section explains how monitor circuits operate and contains two parts.
•
Functional block diagram analysis
•
Circuit analysis
Monitor functional elements (figure FOG-1) include:
•
Standard original equipment manufacturer (OEM) oximetry module
(SOOM), model MP-203 oximetry module. For ease of reference this
module is hereafter referred to as the oximetry module. In actual fact,
the oximetry module is a printed circuit board (PCB).
•
CPU PCB
•
LED Drive PCB
•
LED PCB
•
Front panel controls
•
power inlet
AC
•
Battery
The oximetry module (figure 3-1) drives the oxygen transducer and conditions
the signal derived from the patient (via the sensor connector).
3-1