Installation
Accessories
Depending on the model that you have purchased, you are supplied with several
accessories that can be used in a variety of ways.
NOTE
DO NOT operate the microwave oven without the roller ring and turntable.
NOTE
DO NOT operate the Microwave, Grill and Combi mode with plate warming bowl.
Only use for plate warming function.
Operation Mode
Plate warming bowl
8 English
MS28J5255US_OL_DE68-04553C-00_EN.indd 8
01 Roller ring, to be placed in the centre of
the oven.
Purpose: The roller ring supports the
turntable.
02 Turntable, to be placed on the roller
ring with the centre fitting to the
coupler.
Purpose: The turntable serves as the
main cooking surface; it
can be easily removed for
cleaning.
03 Glass steamer, see page 21.
Purpose: The glass steamer when
using healthy steam function
04 Plate warming bowl, see pages 22 to
23.
Purpose: The plate warming bowl when
using the plate warming
function in warming mode.
Plate Warming
MW
O
X
Installation site
•
20 cm above
10 cm
behind
•
•
10 cm on
85 cm of the
the side
floor
•
•
Turntable
Remove all packing materials inside the
oven. Install the roller ring and turntable.
Check that the turntable rotates freely.
Select a flat, level surface approx.
85 cm above the floor. The surface must
support the weight of the oven.
Secure room for ventilation, at least
10 cm from the rear wall and both
sides, and 20 cm from above.
Do not install the oven in hot or damp
surroundings, such as next to other
microwave ovens or radiators.
Conform to the power supply
specifications of this oven. Use only
approved extension cables if you need
to use.
Wipe the interior and the door seal
with a damp cloth before using your
oven for the first time.
2019-01-07
2:23:52