Daikin 4MXS-R Series Service Manual page 100

SA Indoor Unit Functions
2. Auto-setback by sensor (with presence sensor)
After pre-determined time has elapsed without detection of human presence, the unit automatically
shifts the target temperature gradually for energy saving.
The target temperature displayed on the remote controller remains same as the initial set value
during the above change of target temperature.
The target temperature shifts within the range of the highest programmable temperature while in
cooling operation and the lowest programmable temperature while in heating operation.
Upon human detection, the target temperature returns to the original setting.
Setting on the remote controller
87
Auto-setback by sensor is enabled only when decoration panel BYFQ60C2W1W(S), sensor kit
BRYQ60A2W(S) and wired remote controller BRC1E73 are connected to the main unit and
auto-setback by sensor is set to "enabled" on the wired remote controller.
Factory setting is "disabled".
1
Service Settings 1/3
Test Operation
Maintenance Contact
Field Settings
Energy Saving Options
Prohibit Function
Min Setpoints Differential
Setting
2
Energy Saving Options
Setpoint Range Limitation
Auto-setback by Sensor
Auto-off by Sensor
Setting
3
Auto-setback by Sensor
Enable/Disable
Settings
Setting
4
Auto-setback by Sensor
Enable/Disable
Enable
Setting
5
Auto-setback by Sensor
Save the settings?
Yes No
Setting
Press Cancel button for 4 seconds on
the basic screen to display Service
Settings menu.
Press buttons to select
Saving Options .
Press Menu/OK button to display
Energy Saving Options menu.
Press buttons to select
Auto-setback by Sensor .
Press Menu/OK button to display
Auto-setback by Sensor menu.
Press buttons to select
Disable .
Press Menu/OK button.
Press buttons to select
Press Menu/OK button after selecting
the item. Then the confirmation screen
is displayed.
Press buttons to select
Press Menu/OK button to confirm the
settings and to return to the Service
Settings menu.
SiUS121736EA
Energy
Enable/
Enable .
Yes .
Functions and Control