Setting Edit Points Using The Recorder Unit Only - Sony DNW-A25 Operation Manual

To delete an edit point
Proceed as follows.
IN button
AUDIO IN
–
TRIM
GOOD
LIST
SHOT
DELETE
ENTRY SHIFT
IN
DELETE button
Press the flashing DELETE button
together with the IN button or the
OUT button.
The DELETE button stops flashing,
and the edit point is deleted.
To modify edit points slightly
– +
TRIM
GOOD
LIST MARK
SHOT
ENTRY SHIFT
IN OUT
IN button
OUT button
+
MARK
OUT
DELETE button
TRIM+/MARK and
–/LIST buttons
OUT button
1
While pressing the recorder side
or player side IN or OUT button,
depending on the edit point that
you want to modify, press a TRIM
button (+/MARK or –/LIST) on
the same side of the control panel.
The edit point time data is
displayed.
Each time you press the +/MARK
button, you advance one frame,
and each time you press the –/
LIST button you return one frame.
2
After making the modifications,
press the IN or OUT button that
you pressed in step 1.
3-3-6 Setting Edit Points
Using the Recorder Unit
Only
If you press the PLAYER/DMC
button to light the PLAYER/DMC
indicator on the control panel, you can
operate the player unit or an external
VTR with the recorder side buttons,
and set edit points.
In this case, it is recommended that
you set setup menu item 006 "LOCAL
FUNCTION ENABLE" to ST&EJ
(default setting) on the player unit
beforehand (see page 6-3).
3-9
Editing