Previewing Edit Results - Sony DNW-A25 Operation Manual

To set the preroll time
Using the setup menu item 001,
specify how many seconds (the preroll
time) in advance of the edit start point
to set the preroll point.
The factory default preroll time is 5
seconds.
For details, see page 6-2.
Use the following procedures to cue
up an edit point or preroll the tape.
To cue up an edit point
Press and hold the recorder side or
player side IN or OUT button, and
press the recorder or player
PREROLL button while holding the
IN or OUT button.
IN button
OUT button
– +
TRIM
GOOD
LIST MARK
SHOT
ENTRY SHIFT
IN OUT
The tape runs to the IN point or OUT
point and stops.
REC
PREROLL
INHI
PREROLL button
To preroll the tape
Press the recorder side or player side
PREROLL button.
REC
PREROLL
INHI
PREROLL button
The tape runs to the preroll point,
located in advance of the edit start
point by the specified amount of time,
and then stops.
3-3-4 Previewing Edit
Results
When you finish setting the edit
points, the PREVIEW button flashes
to indicate that you can conduct a
preview.
To conduct a preview, press the
recorder side PREVIEW button,
turning it on.
3-7
Editing