Table of Contents
Advertisement
Extended Menu
Menu items in the 100s, relating to the control panels (continued)
Item number
Item name
107
REC INHIBIT LAMP
FLASHING
108
AUTO EE SELECT
109
FORCED EE WHEN
TAPE UNTHREAD
118
KEY INHIBIT
SWITCH EFFECTIVE
AREA
Sub-item
118-1 REMOTE
118-2 CONTROL
6-12
Setup Menu
Settings
Select whether or not to flash the REC INHI
indicator when recording is prevented though the
REC INHI switch on the control panel is set to OFF.
OFF : Light the REC INHI indicator.
ON: Flash the REC INHI indicator.
When a cassette recorded in Betacam SX format is
inserted and the monitor output switch on the
control panel is set to PB/EE, select the operation
modes in which input video and audio signals are
automatically handled in E-E mode.
S/F/R : In STOP/EJECT/F FWD/REW modes
STOP: In STOP/EJECT modes
During tape threading and unthreading, and when
no cassette is inserted, select whether the monitor
output switch on the control panel controls the
output signal PB/EE setting.
ON : No control by the monitor output switch (the
signal is always an E-E signal).
OFF: Control by the monitor output switch.
Select which switches and buttons can be operated
when the KEY INH in the sub LCD menu is set to
ON. The following sub-items control different sets of
switches and buttons independently.
Select whether the REMOTE/LOCAL switch on the
control panel is enabled.
SELECT
DIS : Disabled.
ENA: Enabled.
Select which switches and buttons operations on
PANEL
the control panel are enabled.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing
operations are disabled.
ENA: All switches and buttons are enabled.
ST&EJ: All switches and buttons except STOP and
EJECT buttons are disabled.
Advertisement
Table of Contents
