Table of Contents
Advertisement
Menu Selection Details
35 RPT SFT
Function: Sets the Repeater Shift direction.
Available Values: - RPT / + RPT / SIMPLEX
Default: SIMPLEX
36 SCAN RSM
Function: Selects the Scan Resume mode.
Available Values: BUSY / HOLD / 2.0 SEC - 10.0 SEC (0.5 SEC step)
Default: 5.0 SEC
BUSY:
HOLD:
2.0 SEC - 10.0 SEC: The scanner will hold for the selected resume time, then resume
37 SCAN SKP
Function: Selects the Memory Scan mode.
Available Values: SKIP/SELECT/OFF
Default: OFF
SKIP:
The scanner will "skip" the flagged channels during scanning.
SELECT: The scanner will only scan channels that are flagged (Preferential Scan List).
OFF:
All memory channels will be scanned (the "flag" will be ignored).
38 SQL EXP
Function: Enables/Disables the split CTCSS/DCS coding.
Available Values: ON / OFF
Default: OFF
When this Set Mode Item is set to "ON", the following additional parameters are available
after the "PAGER" parameter when configuring Set Mode Item "39 SQL TYPE":
D CODE: DCS Encode only.
T DCS:
Encodes a CTCSS tone and Decodes a DCS code.
D TONE: Encodes a DCS code and Decodes a CTCSS tone.
39 SQL TYPE
Function: Selects the Tone Encoder and/or Decoder mode.
Available Values: TONE / TSQL / DCS / RV TONE / PAGER / OFF
Default: OFF
TONE:
CTCSS Encoder
TSQL:
CTCSS Encoder/Decoder
DCS:
Digital Coded Encoder/Decoder
RV TONE: Reverse CTCSS Decoder (Mutes receiver when matching tone is received)
PAGER:
Enhanced Paging & Code Squelch
Note: See also Set Mode Item "38 SQL EXP" regarding additional selections
available during "Split Tone" operation.
32
The scanner will hold until the signal disappears, then will resume
when the carrier drops.
The scanner will stop when a signal is received, and will not restart.
scanning, whether or not the other station is still transmitting.
FTM-3200DR/DE Advance Manual
Advertisement
Table of Contents
