Rinnai J Series Operation Manual page 26

WARRANTY
5 LIMITATIONS
5.1 Third parties are often involved in providing advice to consumers about the climate control solutions best
suited to the consumer's needs. Any advice or recommendations given by such parties, including advice
about Product fitness for purpose and overall system design, sizing and application are not the responsibility
of Rinnai. This includes but is not limited to the heat load calculations, airflow and system balancing.
5.2 This Warranty does not apply to any Product installed at an Installation Site which is outside New Zealand.
5.3 Except where inconsistent with the purchaser's statutory rights and the rights given by this Warranty, all
liabilities of Rinnai for any direct, special, indirect or consequential loss or damage, any damage or expense
for personal injury or any loss or destruction of property, arising directly or indirectly from the use or inability
to use the Product or any of its parts and/or servicing the Product, are expressly excluded.
5.4 Geographical Climate Zones – Rinnai New Zealand Ltd does not exclude this product from installation in the
Cool climatic zone (see below reference map) but cannot guarantee appliance heating performance as per
the published literature at temperatures below zero. Appliance sizing is critical in these installations, see 5.1.
Rinnai
Warm
Mild
Cool
26 Split AC OM