Paper Empty In Tray; Paper Jam In Exit Area; Output Bin Full Remove Paper - Samsung Xpress C480 Series Service Manual

► Error Code
M1–5012 / M1–5013
► Error message

Paper Empty in Tray

► Symptom
Paper is empty in tray.
► Troubleshooting method
1) Remove the cassette. Check if the paper is loaded in tray.
2) Check if the paper empty sensor is contaminated or defective. Replace it.
► Error Code
M3–1110 / M3–1112
► Error message

Paper jam in exit area.

► Symptom
The jammed paper has occurred in the exit area.
► Troubleshooting method
1) Remove the jammed paper.
2) If the problem persists, check the following.
a) Check if there is any obstacles or paper on the paper path. Remove it.
b) Check if the fuser unit is assembled properly. If the fuser unit is defective, replace it.
► Error Code
M3–2130
► Error message

Output bin full Remove paper

► Symptom
The machine detected that the output tray has got full or the bin-full sensor is defective.
► Troubleshooting method
1) Remove the paper on the output tray.
2) Check if the Bin-full Sensor connector is connected properly. Reconnect it.
3) If the sensor is defective, replace it.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-46