Data And Control Flow - Samsung Xpress C480 Series Service Manual

2.2.7.3. Data and Control Flow

The above Block Diagram is explained that:
Host Side is made up of
1) Driver that is Windows application software translate printed data to one of printer language and create spooler file.
2) Web-based Application that offer a various printer additional functions, management of printing job, printer
administration, Status monitor to monitoring the printer status by real time in Web, independent environment on OS.
3) Stand-alone Application that is a similar Window software as same as above 2.
4) The Port Monitor facilitates the flow of information between the Host and Firmware.
Firmware Side is made up of
1) The Network Interface Card is used to relay the communication between Host and Kernel using various network
protocol.
2) The Kernel is manages the flow control emulation as it receives data from Host or Network card; then manges the
printing of the image by the engine.
3) The Application Layer containing the Emulation portion interprets the data from the selected emulation , and transfers
the data to the Kernel Layer.
Copyright© 1995-2017 SAMSUNG. All rights reserved.
2. Product specification and description
2-37