Curtis G3 D500 Series User Manual page 17

PROGRAMMING GUIDE
Programming Options (cont.)
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press
to change the number value. Press
repeatedly
and press .
Access Code -
Once accessed, press
press .
Banner Name - changes the banner name that appears on the display (the factory default is Curtis
change. Then press
or choose ex and press
Warmer Auto-Off -
adjust the number of hours. Then press
P-Maintenance -
press or to choose the desired setting, then, press
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
Pulse Brew -
choose the desired setting. Then, press
disappear from the list of program selections.
Setting Description
A Starts at beginning of brew cycle. 4 cycles of 10 seconds on and 5 seconds off, then on until end of brew cycle.
Starts towards end of brew cycle (without drip-out mode). 4 cycles of 5 seconds off and 4 cycles of 10 seconds on.
B
Ends when brew cycle ends.
C Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 10 seconds off, then on until end of brew cycle.
Manually set. Starts 30 seconds after brew cycle starts. Number of pulses is adjustable from 1 to 10. Pulse on time
D
and off time are both adjustable from 5 to 60 seconds.
Manually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 24. Pulse on time and off
E
time are both adjustable from 1 to 150 seconds.
Pulse Brew Guidelines
•
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
• Settings D and E are manual pulse counts.
or to choose the number to change. Then press
or to choose the next number to change or choose exit and
to change the letter value. Press
repeatedly
to exit.
to set and exit.
or to choose the desired setting. Then, press
to exit.
or to choose the number to be changed. Then press
or to choose the next number to change or choose exit
or to choose the next letter to change
to exit.
repeatedly to change the
or to choose the letter to
or to
to exit.
or to
PG9