5.0 Specifications
Table 1
Model number
Stock numbers
Scroll saw only
Scroll saw with stand
Stand only
Motor and electricals
Motor type
Horsepower
Motor phase
Motor voltage
Cycle
Listed FLA (full load amps)
Starting current
Running current (no load)
On/off switch
Power cord
Power plug installed
Foot pedal cord (optional)
Recommended circuit and fuse/breaker size
Overload fuse
Blade and capacities
Stroke
Speed
Throat capacity
Blade type used
Blades included
Maximum cutting depth
Arm tilt
Main materials
Body
Main table
Trunnion
Arm
Dimensions
Optional stand footprint (LxW)
Overall dimensions – saw only (LxWxH)
Overall dimensions – saw on stand (LxWxH)
Shipping dimensions – saw only
Dust collection
Dust port diameter
Recommended dust extraction volume
Weights
Net weight, saw only
Shipping weight, saw only
Net weight, optional stand only
1
subject to local/national electrical codes.
L = length; W = width; H = height
Specifications in this manual were current at time of publication, but because of our policy of continuous improvement,
JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.
1
45 deg. right; 30 deg. left (45 deg. with removal of dust port)
33.2" x 18.9 x 19" (845mm x 480mm x 485mm)
inside 2.28 in. (58mm); outside 2.5 in. (63mm)
CFM=cubic feet per minute
7
JWSS-18B
727300B
727300K
727300S
brushed DC
1/16 HP (50W)
single
120 V
60 Hz
1.3 A
2 A
0.5 A
rocker style
18 AWG, 6 ft. (183 cm)
15 A
18 AWG, 7.2 ft. (220 cm)
5-15P, 15A
3.15A, 250V
3/4 in. (18.6 mm)
variable, 400 to 1550 stroke/min.
18-1/2 in. (470 mm)
plain-end (pinless) 5 in.
(5) reverse skip tooth
2 in. (51 mm)
steel
steel
steel
steel, plastic cover
28 x 25-1/2 in. (711 x 648 mm)
30.7 x 15.7 x 17.3 in. (780 x 400 x 440 mm)
33 x 25-1/2 x 48 in. (838 x 648 x 1219 mm)
300–350 CFM (8.5–10 CMM)
54 lbs ( 24.5 kg)
62.5 lbs ( 28.5 kg)
21.5 lbs (9.8 kg)