Table of Contents
Advertisement
Driver Installation Under Linux
5
Copy the config file for the kernel you want to build module for
from the appropriate /usr/src/linux/arch directory (listed below)
to /usr/src/linux/.config.
kernel
x86 UP
x86 SMP
x86 ATHLON
6
Make oldconfig
7
Untar the driver source with this command:
tar zxfv 3w-9xxx.tgz
The driver source will be output to a directory called "driver".
8
Change directory to driver.
cd driver
9
To build UP module boot to desired UP kernel, type:
make -f Makefile.oth
The created file is
10 To build SMP module boot to desired SMP kernel, type:
make smp -f Makefile.oth
The created file is
11 Copy the module
/lib/modules/
3w-9xxx.o
12 Edit
/etc/modprobe.conf
alias scsi_hostadapter 3w-9xxx
13 Load the module
modprobe 3w-9xxx
84
3ware 9000 Series Serial ATA RAID Controller Installation Guide
directory
/usr/src/linux/arch/i386/defconfig.default
/usr/src/linux/arch/i386/defconfig.smp4g
/usr/src/linux/arch/i386/defconfig.athlon
3w-9xxx.o
3w-9xxx.smp
3w-9xxx.o
<kernel string>
and add
to the scsi directory.
/kernel/drivers/scsi/
Hide quick links:
Advertisement
Table of Contents
