3Ware 9500S-4LP Installation Manual page 81

4 If you installed a previous driver when you installed your
operating system, then perform this step to copy the driver into
the update directory, as well. Otherwise, go on to Step 5.
For Redhat workstation on Intel x86
cp /mnt/cdrom/packages/drivers/linux/redhat/
ws3_us/x86_intel/3w-9xxx.* /lib/modules/
<put kernel string here>
If prompted to overwrite, type
For Redhat workstation on AMD Athlon 32-bit, type:
cp /mnt/cdrom/packages/drivers/linux/redhat/
ws3_us/x86_athlon/3w-9xxx.*/lib/modules
<put kernel string here>
If prompted to overwrite, type
For Redhat workstation on AMD Opteron and EM64T
cp /mnt/cdrom/packages/drivers/linux/redhat/
ws3_us/x86_64/3w-9xxx.* /lib/modules/
<put kernel string here>
If prompted to overwrite, type
Use the appropriate module name and kernel string, as
Note:
described under "About Variables In the Driver Installation
Instructions" on page 71.
5 For 2.4 Kernels, add the following line to
/etc/modules.conf:
alias scsi_hostadapter 3w-9xxx.o
For 2.6 Kernels, add the following line to
/etc/modprobe.conf
alias scsi_hostadapter 3w-9xxx.ko
www.3ware.com
Driver Installation Under Red Hat Linux
, type:
/update 3w-9xxx.o
.
y
/update 3w-9xxx.o
.
y
/update 3w-9xxx.ko
.
y
, type:
73