License Plate Lamp; Replacement Bulbs - Pontiac 2009 G8 Owner's Manual

9. Push the new bulb into the
socket and turn it clockwise
to lock it into place.
10. Push the bulb socket straight in
and turn it clockwise to lock it
into place.
11. Make sure the seals are applied
to the taillamp assembly and
screws.
12. Raise the spare tire cover.
13. Turn the trunk lining securing
pins clockwise to lock into place.
14. Return the plastic trunk trim
to its original location.
15. Reinstall the plastic
retaining pins.

License Plate Lamp

To replace one of these bulbs:
1. Open the trunk. See Trunk on
page 2-10.
2. Turn the bulb socket
counterclockwise and pull it
straight out.
Vehicle Service and Care
3. Pull the bulb straight out of the
bulb socket.
4. Push the new bulb straight into
the bulb socket until it clicks.
5. Push the bulb socket straight in
and turn it clockwise to lock it
into place.

Replacement Bulbs

Exterior Lamp
High-Beam Headlamp
Low-Beam Headlamp
Stoplamp/Taillamp
Rear Turn
Signal Lamp
Back-up Lamp
For replacement bulbs not listed
here, contact your dealer/retailer.
9-35
Bulb
Number
H9
H11
P21/5W
PY21W
P21W