License Plate Lamp
To replace the license plate lamp bulb:
1. Remove the two screws holding the license plate
lamp assembly to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the lamp
assembly.
Replacement Bulbs
Exterior Lamp
Back-Up Lamps
Fog Lamp
Front Parking/Turn Signal Lamp
Front Sidemarker Lamp
Headlamps,
High/Low-Beam/Daytime Running
Lights
License Plate Lamp
Stoplamp, Taillamp and
Turn Signal Lamp
* Uplevel Model
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3047
898*
3757NAK
194
H13
168
3157K
5-49