Pontiac 2009 G8 Owner's Manual page 197

Tire and Loading Information
Label
Label Example
A vehicle specific Tire and
Loading Information label is
attached to the vehicle's center
pillar (B-pillar). With the driver's
door open, you will find the label
attached near the door lock post.
The Tire and Loading Information
label shows the number of
occupant seating positions (A),
and the maximum vehicle
capacity weight (B) in kilograms
and pounds.
The Tire and Loading
Information label also shows the
tire size of the original
equipment tires (C) and the
recommended cold tire inflation
pressures (D). For more
information on tires and inflation
see Tires on page 9-42 and
Inflation - Tire Pressure on
page 9-49.
There is also important loading
information on the Certification
label. It tells you the Gross
Vehicle Weight Rating (GVWR)
and the Gross Axle Weight
Rating (GAWR) for the front and
rear axle. See "Certification
Label" later in this section.
Driving and Operating
Steps for Determining Correct
Load Limit
Locate the statement "The
1.
combined weight of occupants
and cargo should never
exceed XXX kg or XXX lbs"
on your vehicle placard.
Determine the combined
2.
weight of the driver and
passengers that will be riding
in your vehicle.
Subtract the combined weight
3.
of the driver and passengers
from XXX kg or XXX lbs.
The resulting figure equals the
4.
available amount of cargo and
luggage load capacity. For
example, if the "XXX" amount
equals 1400 lbs and there will
be five 150 lb passengers in
your vehicle, the amount of
available cargo and luggage
load capacity is 650 lbs
(1400 750 (5 x 150) = 650 lbs).
8-31