License Plate Lamp
To replace one of these bulbs:
1. Remove the two screws holding each of the license
plate lamps to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the license
plate lamp.
5-46
Replacement Bulbs
Exterior Lamp
Back-Up Lamp
Front Turn Signal, DRL and
Parking Lamp
High-Beam and Low-Beam
Headlamps
License Plate Lamp
Sidemarker Lamp
Stoplamp, Taillamp and
Turn Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3057KX
3157NAK
H11
168
194
3057KX