Pontiac 2003 Aztek Owner's Manual page 376

Hide thumbs Also See for 2003 Aztek:
Table of Contents

Advertisement

4. Attach the folding
wrench to the jack,
and turn the wrench
clockwise to raise
the jack head
3 inches (7.6 cm)
5. Raise the vehicle
by
turning the folding wrench
clockwise in the jack. Raise the vehicle far
enough off the ground so there is enough room for
the spare tire to fit under the wheel well.
6. Remove all the wheel nuts and take
off the flat tire.
7. Remove any rust or dirt
from the wheel bolts,
mounting surfaces
and spare wheel.
. . s t or -..'t on the wl--?i, or on the parts to
which it is fastened, can make the wheel nuts
become loose after a time. The wheel could
come
off
and cause an accident. When you
cnange a wneei, remove any
rusi
or
diri irorn
the places where the wheel attaches to the
vehicle.
In
an emergency, you can use
a
cloth
or a paper towel to do this; but be sure to use
a scraper
or
wire brush later, if you need to, to
get
a!!
the rEs? or dirt off.
5-8 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents