Bulb Replacement
For the type of bulbs, see Replacement Bulbs on
page 5-53.
For any bulb changing procedure not listed in this
section, contact your dealer.
Halogen Bulbs
Headlamps
1. Open the hood.
Hal-Jen bulbs have pressu-.-ed gas i..-ide
and can burst if you drop or scratch the bulb.
You or others could be injured. Be sure to read
and follow the instructions on the bulb
package.
2. Push in on the
headlamp and lift
up the headlamp
retaining clip partway,
but do not remove.
3. Unsnap the headlamp assembly by pulling it
forward, away from the vehicle.
4. Disconnect the electrical connector by pulling back
u,.,
ii-le iU&i,jY i&j, !uti&&
u,-,
tilt:
t:ieci,ic;ai
connector, to separate the two connectors.
5-49