Pontiac 2003 Aztek Owner's Manual page 361

Inflating something too much can make
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate any object only to its recommended
To use your air inflator system, do the following:
1.
2.
3.
4.
5.
6.
Turn the ignition to ACCESSORY or ON.
Attach the appropriate nozzle adapter, if required,
to the end of the hose that has the pressure gage.
Attach that end of the hose to the object you wish
to inflate.
Remove the protective cap covering the outlet.
Attach the other end of the hose to the outlet.
Press the accessory inflator switch. The light in the
switch will come on to show the system is working.
If the air inflator system does not turn on or the light
does not come on, the fuse may be blown or installed
incorrectly. See Fuses
and Circuit
Breakers
on
page 5-98 or see your dealer for service.
Your air inflator will automatically shut off after about
10 minutes. The light in the switch will blink. After about
one minute you can use the system again. Press the
inflator switch and the indicator light will come on.
Notice: Don't run your air inflator for longer than
30 minutes at one time. If you do, you may damage
the system.
After running the air inflator for 30 minutes, wait at least
10 minutes before restarting the air inflator.
To turn off the inflator, do the following:
1. Press the switch and detach the hose, first from the
inflated object, then from the outlet.
2.
Put the protective cap back on.
3. Place the inflator kit tools in the pouch, and store in
the glove box.
To put the cover back on, line up the tabs at the back of
the cover and put it in place. Push down the tab to
secure the cover.
5-66