Pontiac 2003 Aztek Owner's Manual page 117

Garage Door Opener Compartment
You can store and operate your garage door opener in
the third compartment of your overhead console. To
install your garage door opener, follow these
instructions:
1 . Open the compartment by pressing the latch
forward.
2. Remove the garage door opener button, by pressing
the tabs and pulling it down.
3. Remove the piece of self-sticking hook and loop
fastener from the top of the garage door opener
compartment.
2-40
4. Peel the protective backing from the hook and loop
fastener and press it firmly to the back of your
garage door opener.
5. Line up the button on the garage door opener with
the opening in the storage compartment door. Make
sure the garage door opener button is facing
down and then press the opener firmly into the
garage door opener compartment.
from the garage door opener button. Each peg is a
different size.
6. Once the opener is installed, remove the three pegs
7. Put the garage door opener button back in by
inserting the tabs into the
slot
in the garage
door opener compartment.
8. Press the button on the garage door storage
compartment. If your garage door opener does not
work you will need to change the pegs until it does.
Storage Compartment
To open the storage compartment, located at the front
of the overhead console, press the release latch
forward. Then pull the compartment down to the full
open position.