Table of Contents
Advertisement
On the base/router
On a Gigaset base:
Other base:
On the handset
Please register handset flashes on the display.
Registering to a Gigaset base
¤
Press the display key Regist.
system PIN (default setting on Gigaset bases: 0000)
Registering to another base
¤
. . . Open the menu using the control key
OK
Register Handset
system PIN
OK
A handset can be registered to up to four bases.
De-registering the handset
¤
Menu
Settings
Select handset (the actual handset is indicated with a <)
if required
OK
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so that
you can use the alarm.
¤
Press the display key below the display Time. The entry field will open.
¤
use
to enter the month, day and year in 8-digit format,
e. g.
To correct errors: Press left or right on the control key
¤
Enter the hours and minutes in 4-digit format using the keypad, e.g.
07:15. Switch between the fields using the control key, if necessary.
The display shows Saved. You will hear a confirmation tone.
To revert to idle status:
en fr es
¤
Press and hold the Registration/paging key on the base
(approx. 3 seconds).
¤
Information regarding the registration procedure
Documentation regarding your base
OK . . . an available base is sought
OK
. . . an available system is sought
OK
Registration
. . . confirm de-registration with Yes
Press and hold the End call key
Availability and operation of the functions
may differ on your telephone.
OK
Settings
OK
OK
De-register Handset
OK . . . enter system PIN,
for April 1st 2019.
in order to swap between fields.
.
Getting started
. . . if required: enter
Registration
. . . if required: enter the
OK
OK
OK
for
7
Hide quick links:
Advertisement
Table of Contents
