Further Functions; Using The Handset As An Alarm Clock; Baby Monitor - Gigaset E560h Manual

Hide thumbs

Table Of Contents

Table of Contents

Using the handset as an alarm clock

Activating/deactivating the alarm clock

The time is set

Alarm Clock

After you activate the alarm clock, the menu for setting the wakeup time opens automatically.

Setting the wakeup time

Alarm Clock

Enter wakeup time

If the alarm clock is activated, you will see the

display and the wakeup time after it.

The wakeup time is shown in the display only when all

calls in the call lists have been read.

Setting the alarm clock signal

Alarm Clock

Switching off/repeating the alarm after an interval (snooze mode)

Prerequisite: An alarm call sounds.

Deactivate until the next alarm call: Press Off.

Or:

Snooze mode:

Press Snooze or any key. The wake-up call is deactivated and then repeated after 5 minutes.

Or:

Press nothing. The alarm call is deactivated after 60 seconds and then repeated after

5 minutes. After the fourth repetition, the alarm call is deactivated for 24 hours.

Baby monitor

When the baby monitor is switched on, the stored (internal or external) destination number is

called as soon as a defined noise level is exceeded in the vicinity of the handset.

In baby monitor mode, incoming calls are only signalled on the display (without ringtone). The

display backlight is reduced to 50%. Advisory tones are deactivated.

en fr es