Gigaset E560h Manual page 25

The police, ambulance service or fire service must not be used for an emergency call.
Initially setting up the emergency function
If you have already assigned the key
number (
¤
In idle status, press the direct dial key
¤
Activate Emergency Function
Entering a destination number:
You have the option of entering three additional numbers:
¤
Further number?
Confirm by pressing Yes, if you would like to enter other emergency numbers and then enter
the numbers. Confirm by pressing No, if you do not wish to add any further emergency
numbers.
The display shows Saved.
The emergency function is now set up and is automatically activated.
Your emergency numbers:
1
2
3
4
•
If your telephone is connected to a PABX, you must enter the access code (outside
line code) as the first digit of your entry, if necessary (
•
You should carry out a test run to ensure that the emergency function has been
correctly set up.
Changing the emergency numbers
¤
Menu Settings
Numbers OK
Enter the numbers and names as outlined above.
Deleting emergency numbers
¤
Menu Settings
Numbers OK
The entry has been deleted.
en fr es
p. 9). You can then save the emergency number on the direct dial key
OK (
Enter the number
OK Emergency Function
(Select entry 1 to 4)
OK Emergency Function
(Select entry 1 to 4)
Availability and operation of the functions
may differ on your telephone.
for the direct dial, you must first delete this
on the handset.
= activated)
OK
OK
Menu Edit Entry
OK
Menu Delete Entry
Emergency function
Enter the name
user guide of your PABX).
Emergency
OK
Emergency
OK
.
OK
23