Table of Contents
Advertisement
WARNING
Turning on Display
Tabletop Mounting
ELECTRICAL HAZARD RISK – Inside the Kiosk contains power wires and
electronic devices. Only authorized personnel should open kiosk. Take
necessary precautions when working with electrical equipment.
NOTE: Under normal operation conditions, the display should turn on when the
PC is turned on. However, in the event of power loss to the kiosk or other failure,
the display may not turn on.
1
Open the kiosk door (See OPENING KIOSK).
2
Locate the remote and press the power button.
NOTE: The kiosk must be mounted and secured directly to the surface of a
countertop or table to ensure structural stability.
1
After the kiosk has been moved to the desired location, open the main kiosk
door. (See OPENING KIOSK on pages 11-12).
2
Use the kiosk base dimensional detail as a drilling template to accurately
locate the mounting points for the bottom of the kiosk base.
3
Using a drill, make (QTY 4) 0.5" holes (total) that correspond to the (QTY 4)
separate mounting points on the baseplate.
Opening the K250 Extended Kiosk
K250 I
G
NSTALLATION
UIDE
S
ETUP
21
Advertisement
Table of Contents
