Setup K250 Installation Safety Instructions - VeriFone K250 Installation Manual

Hide thumbs Also See for K250:
Table of Contents

Advertisement

Setup
K250 Installation
Safety
Instructions
This chapter describes the setup procedure for the K250 in the following sections:
K250 Installation Safety Instructions
Inside the Shipping Carton
Installing the K250 Kiosk
Do not attempt to install this product until all the instructions and warnings have
been read and properly understood.
1
Please check carefully to make sure there are no missing or defective parts -
defective parts must never be used.
2
Verifone is not liable or responsible for damage or injury caused by improper
installation, improper use or failure to observe these safety instructions. In
such cases warranty might get void.
Product Location
1
When determining location, ensure that all access doors and panels are
accessible and have enough room to fully open or remove. Ensure that users
can comfortably walk up to and use the kiosk without obstructions.
2
Do not install the kiosk near electrical or explosive hazards or where there are
falling objects else excessive dust and debris will get collected on the kiosk.
3
Do not operate or service the unit unless it is securely mounted to a fixed
surface or stable structure. Failure to mount securely can cause injury or
damage to the kiosk.
Product Safety
Only authorized personnel should remove covers or warning label on the
kiosk.
Ensure the product is connected to a grounded electrical outlet.
Do not expose this product to rain or moisture to prevent from fire or shock
hazards.
Disconnect the power cord from the AC outlet to fully disconnect the power to
the unit.
Do not operate the product in the following conditions:
damaged cord or plug
C
HAPTER
K250 I
G
NSTALLATION
UIDE
3
13

Advertisement

Table of Contents
loading

Table of Contents