Getting Started - Aiphone IX Series Programming Manual

Adding an IXW-MA to an Existing System

Getting Started

The IXW-MA is an IP relay with 10 configurable outputs that can be remotely triggered by a station based on its Contact Change
settings. Typically, these outputs are used for remote door release or to activate signaling devices. If the IXW-MA wasn't part of the
original system configuration, it will need to be added. If the IXW-MA is already part of the system, continue to page 4.
Step 1: Opening the System Configuration Settings
From the top menu bar, click Tools(T) and select System Configuration.
Step 2: Adding a New Station
The Add New Station window will open. Use this screen to add one or more IXW-MA stations.
The new IXW-MA(s) will appear in the Station Settings List with station number and name set in the Add New Station window.
A default IP address of 192.168.1.10 (.11 for the second, .12 for the third, and so on) will be given to the station when added. This
IP address can be edited by clicking Station Details from the Advanced Setup section below.
For more details about the features and information above, please contact Technical Support.
Aiphone Corporation | www.aiphone.com | (800) 692-0200
Station Type
Select the IXW-MA using the Station
Type drop-down and enter the quantity
of IXW-MAs to be added. Click Add .
Station Information
Edit the station Number and Name for
the new IXW-MA(s).
Add
Click Ok to add the station.
Adding a Station
Click Add New Station
Pg. 2