Adding a New Station
Getting Started
Adding a new station to an existing system requires having the system configuration file open in Support Tool and a network
connection to all existing stations. The new station should be connected to the network and completed its initial boot up
process before starting step one.
Step 1: Opening the System Configuration Settings
From the top menu bar, click Tools(T) and select System Configuration.
Step 2: Adding a New Station
Multiple stations and station types can be added on the Add New Station screen.
Note:
Refer to page 4 and continue through page 7 to complete the steps for editing the station
information, association, and uploading the setting files.
8 | IX Series Quick Start Programming Guide
Add New Station
Click Add New Station .
Station Type
Use the Station Type drop-down menu to
select the Station Type of the new station.
Station Quantities
Enter the quantities of stations that are
being added to the system.
Add the station(s)
Click Add to add the station(s) to the
Station Information table below.
Finished
Click OK once all stations of each
Station Type has been added.