Hummer 2003 H2 Owner's Manual page 326

Hide thumbs Also See for 2003 H2:

Table of Contents

4. Assemble the jack and tools as follows:

Front Flat Tire: Attach the jack handle (E) with

the hook end connected to the u

jack (A). Slide the ratchet (F) onto the jack handle (E)

with the UP mark facing you.

Rear Flat Tire: Attach the jack handle extension (D)

to the jack handle (E) and then press the clip (arrow)

so it engages. Then attach the jack handle (E) with

the hook end connected to the u

jack (A). Slide the ratchet (F) onto the jack handle

extension (D) with the UP mark facing you.

5. Turn the ratchet (F) clockwise to raise the jack head

to the lifting point.

hook/clevis on the

Front Flat Tire: Position

the jack under the vehicle

on the frame behind the

flat tire where the frame

sections overlap. See the

graphic following for an

approximate measurement

of the jack location on

Front Position

X = 28.5 inches (72.0 cm)

Chapters

Table of Contents